Regarding my earlier post on having a pair of links on the bench and could
advise which side took left hand and which took right, that comment was in
refrence to 4A through 6 Vertical links, and in my cars the pitch on the
earlier cars was finer and longer in length than on the 4A - 6 cars
A. Daniel Cronin
248 761-2673
----- Original Message ----
From: Randall <tr3driver@ca.rr.com>
To: triumphs@autox.team.net
Sent: Friday, March 14, 2008 1:52:46 PM
Subject: Re: [TR] Trunnions later TR4 with 3 degree caster
> So are you saying the TR4 had different links than either the
> TR3 or the Tr4A-6?
No, the TR4 vertical links were the same as TR2-3. When the caster was
added, the link itself did not change, only the location of it's upper end
relative to the lower end. The A-arms, ball joint, trunnions, steering
levers, etc. all changed to tilt the link, but the link itself did not
change until the redesign with the TR4A.
Randall
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as adcronin@ameritech.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|