In a message dated 3/14/2008 5:09:12 PM Central Daylight Time,
tr3driver@ca.rr.com writes:
> >So it doesn't hurt the trunions to crank them a couple
> >degrees out of shape,
> >then.
>
> No, I didn't say that. The late TR4 took different trunions than the
> TR2-early TR4; and being a "couple degrees out of shape" is the only
> difference between the three different trunions (0 degree both sides, 3
> degree right and 3 degree left). It is apparently possible to assemble them
> that way, but unless things are badly worn, the result will be binding.
>
Now you're confusing me. You said they didn't change trunions (or vertical
links) when they added caster to the TR4. Now you say there are 0 and 3R and
3L trunions. Are these 3 deg trunions different than what is used on the
TR4A-TR6?
Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|