triumphs
[Top] [All Lists]

Re: [TR] TR3A Fuel Gauge Calibration

To: "'David Willett and Carol Gray'" <willgray@vaxxine.com>,
Subject: Re: [TR] TR3A Fuel Gauge Calibration
From: "wbeech" <wbeech@flash.net>
Date: Fri, 19 Sep 2008 09:04:10 -0600
My first stop would be the local Radio Shack, but here is a link to an
on-line supplier as well:
http://www.partsexpress.com/pe/pshowdetl.cfm?Partnumber=016-68

Bill B
'58 TR-3A TS/30766 L
'59 TR-3A TS/64974 LO
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
 

-----Original Message-----
From: triumphs-bounces+wbeech=flash.net@autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net@autox.team.net] On Behalf Of David
Willett and Carol Gray
Sent: Friday, September 19, 2008 8:10 AM
To: triumphs@autox.team.net
Subject: [TR] TR3A Fuel Gauge Calibration

In the procedure described in the "MGA With An Attitude" website for
calibration of a Jeager fuel gauge,  the use of two 68 ohm resistors is
called for:  can anyone tell me where I can purchase resistors like this?
  Dave
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as wbeech@flash.net

http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.169 / Virus Database: 270.7.0/1679 - Release Date: 9/18/2008
5:03 PM
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>