> In the procedure described in the "MGA With An Attitude" website for
> calibration of a Jeager fuel gauge, the use of two 68 ohm resistors
> is called for: can anyone tell me where I can purchase resistors
> like this?
I forgot to mention this earlier : What you are looking for are "carbon
composition, 1/2 watt resistors with axial leads". Other types will work of
course, but are more expensive.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|