I thought the subject might get some attention.
When I rewired my TR3I originally used a small remote switch designed
to control lights on a boat to act as a remote cut off for the
ignition switch. But after about a year it died, so now I am trying
to come up with an option that will last a little longer. So I was
thinking about trying to find a remote control from a modern car to
use as a switch to turn on & off the ignition circuit.
I know I can use a toggle switch but anyone can figure that out -
besides I already a fan and a 4 way flasher switches under the
dash :-). But a remote control switch could be put anywhere (trunk,
under the seat, engine compartment).
Has anyone done this? Does anyone have any suggestions where I could
get a remote control switch that would work with our very simple
electrical system??
John
John A. Wise
Glendale, AZ
1960 Triumph TR3A
Commission No: TS80422L
http://members.cox.net/60tr3a/
http://www.triumphowners.com/876
1977 Porsche 911S
http://members.cox.net/porsche911s/
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|