triumphs
[Top] [All Lists]

Re: [TR] TR6 ammeter peg/starter-update

To: triumphs@autox.team.net, Bob <rpeglow@optonline.net>
Subject: Re: [TR] TR6 ammeter peg/starter-update
From: <fishplate@charter.net>
Date: Mon, 13 Apr 2009 8:27:37 -0700
---- Bob <rpeglow@optonline.net> wrote: 

> Disconnected and cleaned all starter and solenoid connections.

Did you disconnect and clean the ground connections?  (Engine to body and body 
to battery, IIRC)  You could try connecting the starter body to the negative 
battery terminal with half a set of ~good~ jumper cables and see if it exhibits 
the same behavior...

Jeff Scarbrough
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>