My cam is stock so I use .010 & .012 (allowing a bit of leeway on the
exhaust) and mine makes a bit of noise.
IOW, maybe they won't be quiet once the oil is warmed up. Also, having them
w/i .001 is pretty close I'd say.
On Sun, Apr 26, 2009 at 4:35 PM, <DLylis@aol.com> wrote:
> I have a BPNW 270 cam
> in this motor and it calls for .12 int and .14 exh. I started it first
> time and drove maybe 20 miles and the valves became noisy so I waited
> overnight and checked and they were .001 + wide.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|