triumphs
[Top] [All Lists]

Re: [TR] TR4 carpet installation details

To: TR List <triumphs@autox.team.net>, Geo Hahn <ahwahnee18@gmail.com>
Subject: Re: [TR] TR4 carpet installation details
From: <dmericas@austin.rr.com>
Date: Sun, 17 May 2009 13:01:07 -0500
Geo --

This is exactly what I needed.

Are there any attachments to the floor pieces under the seats and the front 
edge of the "rear seat" carpet?

Thanks.

Dean

---- Geo Hahn <ahwahnee18@gmail.com> wrote: 
> On Sun, May 17, 2009 at 6:50 AM, <dmericas@austin.rr.com> wrote:
> 
> > ...For example, how are the three carpet pieces that drape the tansmission
> > tunnel affixed? I can't tell from any of the catalog and workshop manuals
> > that I've got.
> >
> 
> The tunnel pieces are secured using the ring-with-pointy-thing and it's
> complementary female snap (called a Veltex).  The male snap is on the metal
> or fibreboard tunnel cover.  The 3-pc carpet snap is Moss p/n 228-128.
> 
> If you have neither the original carpet nor the original fibreboard tunnel
> then location is approximate.
> 
> I have attached 2 photos -- since the snaps are almost invisible once
> installed I have used a bit of white tape where each is located.
> 
> First photo in the rear (metal) tunnel.  One pair of snaps near the forward
> edge -- perhaps you still have the male snap on the tunnel or at least the
> hole where it was riveted.  The rear of that carpet is secured by the
> eye-bolts for the seat belts.
> 
> Second photo shows one side of the main tunnel, it is secured to the tunnel
> by 3 pairs of those same snaps.
> 
> If I have missed anything someone tell me.
> 
> I realize that the list version of this message will have the images
> stripped off -- if anyone wants to see them pmail me.
> 
> Dean -- let me know if you need other pics or some measurements.
> 
> Geo
> 
> PS -- To locate the snaps you can put the male snaps on, then press the
> correctly positioned carpet firmly against it leaving an impression that
> will tell you where to mount the female snap.  If the carpet you are using
> doesn't leave an impression then a bit of white chalk on the male snap will
> mark the spot well.
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>