So far, I have never damaged an engine that met the basic rule that Mark
mentions below. The shop manual says 70psi at 2K rpm and 70C temperature.
Mike
Mark J Bradakis wrote:
> > Before I give away my numbers, what range (idle to full
> acceleration) should one aim
> > for with oil pressure on a TR3?
>
> Basic rule of thumb for minimum oil pressure is 10 psi for every 1,000
> rpm.
>
>
> mjb.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|