triumphs
[Top] [All Lists]

Re: [TR] TR6 body gap at driver's door

To: McGaheyRx@aol.com, areich@telus.net, triumphs@autox.team.net
Subject: Re: [TR] TR6 body gap at driver's door
From: Chad <triumph74tr6@yahoo.com>
Date: Mon, 20 Jun 2011 19:55:42 -0700 (PDT)
Shimming the body is pretty straight forward.  IMHO, any professional
restoration shop that can't get it right isn't very competent.

Don't let a
door gap steer you away from an otherwise good car.  It can be 
fixed....just
takes time and money or time and skill.  :-)

Chad in Tulsa
________________________________
From: "McGaheyRx@aol.com" <McGaheyRx@aol.com>
To: areich@telus.net; triumphs@autox.team.net
Sent: Mon, June 20, 2011 4:06:36
PM
Subject: Re: [TR] TR6 body gap at driver's door

detaching the body from
frame and shimming is the only way to fix that -  
and it is very hard to get
right - I have seen more than 1 car look worse 
after  this has been attempted
by competent restoration shops.
- and finding a TR6 with perfect door/body
gaps can be a bit like looking  
for a unicorn.

Cheers
Jack Mc




In a
message dated 6/20/2011 4:00:38 P.M. Eastern Daylight Time,  
areich@telus.net
writes:

I am  looking for a TR6 and came across one with quite a gap at the
rear 
side of  the driver door where it meets the back of the body. The door
closed OK,  but it didn't look good.
The fellow said he had talked to a body
shop and  they said they could 
detach the tub at the back and shim up the
body to  fix the gap.


triumphs@autox.team.net

Donate:
http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums:
http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/triumph74tr6@yahoo.com


triumphs@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>