If I pulled the cover off the trans, how would I test for a bad
layshaft?
Jonas Payne
Vice President of Preconstruction
Thor Construction
PH: (702) 269-2007
Fax: (702) 269-7095
Cell: (702) 358-5084
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Dave1massey@cs.com
Sent: Monday, February 06, 2012 5:31 AM
To: triumphs@autox.team.net
Subject: Re: [TR] Odd Tapping Noise TR3
In a message dated 2/5/2012 8:36:24 PM Central Standard Time,
ccsimonsen@gmail.com writes:
> I've done a poor mans rebuild on a few transmissions. Its pretty easy
> to swap out the layshaft.
>
It sure is. But if the layshaft is bad odds are the bearings are also
in need of replacement. And last time I did mine I needed a new cluster
gear.
Oh, wait. You said poor man's rebuild. Never mind.
Dave
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/jpayne@thorcon.net
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|