triumphs
[Top] [All Lists]

Re: [TR] Fwd: Re: TR6 Jacking Points

To: mtgaines@presby.edu, Triumphs@autox.team.net
Subject: Re: [TR] Fwd: Re: TR6 Jacking Points
From: thenicholls@verizon.net
Date: Fri, 10 Feb 2012 18:20:19 -0600 (CST)
 Tim,

Please, please do not depend on cinder blocks to save your life.  They will 
crumble under the weight of the car.  Jack stands work, cinder blocks don't.

Thanks,

Craig
1972 Triumph TR6
 
 
On 02/10/12, Tim Gaines<mtgaines@presby.edu> wrote:
 
Well, I certainly wouldn't get under or reach far under the car while 
jacking no matter where the jack is placed. My floor jack handle 
reaches to the side and lets me pump it without being underneath, 
though I have to admit there is little range of motion at 
first. Those rails are close, and I've never had a hint that the 
board (a sturdy one of course) was close to failing; no creaks or 
cracks. The fact that the car goes straight up means that the front 
stands, already in place, don't tip to the side at all. That was 
something that always scared me. Believe me, when I contemplate 
going underneath my car, I have a healthy fear. I don't rely on just 
the jack stands either. I slide cinder blocks underneath once the 
stands are set.

Tim



>wow - you jack your car up on a 2x6 bridging the frame rails? Seems a
>little light to me - please be careful.
>
>On Fri, Feb 10, 2012 at 12:52 PM, Tim Gaines <mtgaines@presby.edu> wrote:
> > I do the same, with a 2X6 about 16" long. My exhaust hangs down just below
> > the level of the rails, so I also add a short 2X4 under each rail to bridge
> > the exhaust. It works well, and as Dave says, the car goes up evenly. So,
> > one lift at the front cross and one in the back with a temporary cross.
> >
> > Tim
> >
> >> The two frame rails come pretty close together at the T-shirt area so you
> >> can lift there setting the jack under one of the rails. But that is a
> >> little
> >> bit unstable. I use a 2X4 to span the gap and up it goes. But with the
> >> jack lifting from the side the car wants to move sideways on the front
> >> stands
> >> so I lift in stages and square things up once it is up.
> >>
> >> Dave
> >>
> >> ** triumphs@autox.team.net **

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/thenicholls@verizon.net

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>