I have the same issue. If you come up with a solution let me know. I
was thinking about sewing a piece of webbing at a couple of the LTD
locations and punching a hole so that it was secured on the LTD under the
cover when it is snapped in place. Haven't tried a scrap piece to see if
the snap would still work ok. Next weekend when I get back 'on project'.
Carl
-----Original Message-----
From: Triumphs [mailto:triumphs-bounces@autox.team.net] On Behalf Of Angelo
Graham
Sent: Thursday, July 9, 2015 8:00 PM
To: triumphs@autox.team.net
Subject: [TR] Flapping hood stick cover
Hello List:
Now that we have some decent driving weather, wondering if there are any
solutions to securing the hood stick cover in our side-screen TRs?
I manage to tightly wrap the cover around the sticks, but a mile or so down
the road it is flapping wildly in the wind. Have tried a bungee, but really
looks bad and have to undo a couple of the fasteners, Anyone try a velcro
type of fastening?
Thanks for any insights.
Angelo Graham
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|