Mail Archive Search: <+from:IDPHR@aol.com>

Results:

References: [ +from:IDPHR@aol.com: 87 ]

Total 87 documents matching your query.

61. : Re: [oletrucks] First time body work (score: 1): Author: IDPHR@aol.com; Date: Fri, 3 Oct 2003 13:53:46 EDT; I also started out about 10 years ago restoring my '51 3100. I had no idea where to start and what to do or not do. That ignorance and not asking advice cost me plenty in $$s , wasted time and untold; /html/oletrucks/2003-10/msg00018.html (7,514 bytes)
62. [oletrucks] Weatherstrip Channel Replacement (score: 1): Author: IDPHR@aol.com; Date: Thu, 9 Oct 2003 11:17:50 EDT; We replaced the floor in my '52 Burb and noticed the curved channel for the inner weatherstripping to slide into (on the inside kick panel frame next to the door) was pretty mangled. Has anybody enco; /html/oletrucks/2003-10/msg00057.html (6,860 bytes)
63. [oletrucks] Alternate Battery Location (score: 1): Author: IDPHR@aol.com; Date: Thu, 23 Oct 2003 10:12:57 EDT; I need to move my battery location from under the passenger side floor to the engine compartment or some other accessible location on my '52 Burb. I'm installing a SBC w/ auto. What is the best locat; /html/oletrucks/2003-10/msg00225.html (7,548 bytes)
64. [oletrucks] Cab Windlace Retainer Strip (score: 1): Author: IDPHR@aol.com; Date: Fri, 24 Oct 2003 22:33:17 EDT; I'm looking for someone who stocks, fabricates or wants to sell AD Cab Windlace Retainer Strips. These are the strips that hold the windlace weatherstripping on the door edge of the kick panel. My pr; /html/oletrucks/2003-10/msg00272.html (6,774 bytes)
65. [oletrucks] Door Hinge Interchange (score: 1): Author: IDPHR@aol.com; Date: Sat, 25 Oct 2003 10:11:40 EDT; Do '54 3100 door hinges fit 47-53 3100 trucks? oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959; /html/oletrucks/2003-10/msg00279.html (6,431 bytes)
66. [oletrucks] Re-rusting (score: 1): Author: IDPHR@aol.com; Date: Sun, 26 Oct 2003 09:58:16 EST; I've also had a lot of luck with electrolysis de-rusting (using a battery charger for power)...it's particularly good with small parts. Tip: old beat up stainless trim rings make terrifc donor anodes; /html/oletrucks/2003-10/msg00283.html (6,887 bytes)
67. [oletrucks] Water Pump (score: 1): Author: IDPHR@aol.com; Date: Mon, 27 Oct 2003 10:52:03 EST; I'd try Kanter's in Denville, NJ... oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959; /html/oletrucks/2003-10/msg00303.html (6,311 bytes)
68. [oletrucks] Questions on Mods to 52 Burb (score: 1): Author: IDPHR@aol.com; Date: Thu, 30 Oct 2003 09:31:25 EST; I've installed 4 wheel disc brakes on my '52 Burb. I have used a set (4) of Monte Carlo discs . I have a 70 "A" car power brake booster and a 70 "A" car master cylinder for a front disc and rear drum; /html/oletrucks/2003-10/msg00360.html (7,245 bytes)
69. [oletrucks] Windshield Washer for AD Truck (score: 1): Author: IDPHR@aol.com; Date: Fri, 31 Oct 2003 14:28:56 EST; Anyone found a good fit windshield washer system to use in an AD truck? oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959; /html/oletrucks/2003-10/msg00391.html (6,363 bytes)
70. [oletrucks] Suburban Seats - AD vs TF (score: 1): Author: IDPHR@aol.com; Date: Thu, 11 Sep 2003 10:15:41 EDT; I guess everyone knows that finding AD Suburban middle and back seats is very difficult. I have an opportunity to buy a set of TF Suburban seats...but I don't know the dimensions of the original AD s; /html/oletrucks/2003-09/msg00166.html (7,225 bytes)
71. [oletrucks] Suburban Seats AD vs TF (score: 1): Author: IDPHR@aol.com; Date: Thu, 11 Sep 2003 13:38:41 EDT; Mark & Steve... I gather from the non-conclusive responses that nobody really knows if TF seats will fit AD Burbs..I also understand that everyone would like to have these seats and give them a try o; /html/oletrucks/2003-09/msg00169.html (7,248 bytes)
72. [oletrucks] A Reluctant Goodbye (score: 1): Author: IDPHR@aol.com; Date: Sat, 13 Sep 2003 15:26:26 EDT; Ole Truckers...I reluctantly, but proudly, say goodbye to all of you because I've been banned from this site because I dared to disagree with the site moderator about freedom of expression. Although; /html/oletrucks/2003-09/msg00191.html (7,215 bytes)
73. [oletrucks] Banned from the Old-Chevy-Truck Site (score: 1): Author: IDPHR@aol.com; Date: Sat, 13 Sep 2003 22:11:03 EDT; Oletruck Guys... I was just told, (I didn't know), after all these years that Oletrucks and Old-Chevy-Trucks were two (2) different sites controlled by two diffent moderators. I was banned, obviously; /html/oletrucks/2003-09/msg00194.html (6,657 bytes)
74. [oletrucks] Help with Hinges (score: 1): Author: IDPHR@aol.com; Date: Fri, 25 Jul 2003 10:33:39 EDT; My 51 3100 just had the emergency brake slip in the garage with the drivers side door open...truck rolled back and 180'd the door. The side of the cowl got caved and the lower door hinge broke a piec; /html/oletrucks/2003-07/msg00653.html (6,783 bytes)
75. [oletrucks] 47-53 3100 Chrome Grill Bars (score: 1): Author: IDPHR@aol.com; Date: Sat, 07 Jun 2003 19:05:03 -0400; Does anyone know of a vendor or anybody for that matter that would sell the individual chromed bars for the truck's grill w/o having to buy the whole shooting match. I had my top bar chromed (cost a; /html/oletrucks/2003-06/msg00131.html (6,895 bytes)
76. [oletrucks] Bed Wood Finishing (score: 1): Author: IDPHR@aol.com; Date: Wed, 8 Jan 2003 17:36:08 EST; I've refinished a Horkey's oak bed. Sanded first with about 320 grit. Tacked carefully.Spar varnish(oil based) cut 50/50 with thinner as 1st coat. Do the 50/50 again as 2nd coat. Light sanding with w; /html/oletrucks/2003-01/msg00077.html (7,654 bytes)
77. [oletrucks] Swapping a '54 235 for a '58 235 (score: 1): Author: IDPHR@aol.com; Date: Mon, 12 Aug 2002 13:03:54 EDT; I'm considering upgrading my '51 3100 (which currently has a '54 235) to a '58 235. Are there any problems/modifications I need to consider with this swap? ie...water pump, distributor, alternator, o; /html/oletrucks/2002-08/msg00152.html (6,722 bytes)
78. [oletrucks] Jammed Linkage on Saginaw 4 Speed (score: 1): Author: IDPHR@aol.com; Date: Tue, 7 May 2002 15:24:38 EDT; I have tried everything I know or have been told about fixing the jamming problem with my Saginaw 4spd. The linkage continually jams in 2nd gear. I have spoken to people at Patrick's where I bought t; /html/oletrucks/2002-05/msg00120.html (7,985 bytes)
79. [oletrucks] NOS asbestos rear main seals for '54 235 (score: 1): Author: IDPHR@aol.com; Date: Tue, 28 May 2002 13:11:41 EDT; I've heard there are still a few of these seals around...I need one. Will pay handsomely. Let me know. PS I've already tried neoprene, fiberglass and goretex. Thanks...Steve G. oletrucks is devoted t; /html/oletrucks/2002-05/msg00354.html (6,756 bytes)
80. Re: [oletrucks] Deluxe Panel Fender Bars???..... (score: 1): Author: IDPHR@aol.com; Date: Sat, 18 Mar 2006 21:28:56 EST; I've acquired two complete sets for my Burbs over the last five years. Just by keeping my eyes open, looking in junk yards, ebay and swap meets. There is a guy in CA who still sells the fender spears; /html/oletrucks/2006-03/msg00049.html (7,053 bytes)

Current List: 61 - 80
Page: [1] [2] [3] [4] [5]