- 1. [6pack] Idle after carb rebuild (score: 1)
- Author: "John North" <johncnorth@gmail.com>
- Date: Sun, 10 Jun 2007 16:43:44 -0400
- Having trouble getting idle down below 1500 on rebuilt carbs... I replaced all the seals including the spindle and the bypass valve. Car starts and runs quite well, but idle is a problem. It mostly s
- /html/6pack/2007-06/msg00058.html (6,876 bytes)
- 2. Re: [6pack] Idle after carb rebuild (score: 1)
- Author: DLylis@aol.com
- Date: Sun, 10 Jun 2007 19:09:16 EDT
- Are these Z-S carbs. What year car are we taking about? IMO your problem is not too much gas, it is too much air. I had similar symptoms with Z-S with a vacuum leak. David Lylis 69 TR6 CC26160L 60 TR
- /html/6pack/2007-06/msg00060.html (6,785 bytes)
- 3. Re: [6pack] Idle after carb rebuild (score: 1)
- Author: "Nick Gemas" <gln@worldpath.net>
- Date: Sun, 10 Jun 2007 19:33:17 -0400
- It would seem to me they are running too rich, which would explain, possibly why it dies off when you put the synchonizer over the carb. If you have an adjustable synchronizer and you have it adjust
- /html/6pack/2007-06/msg00061.html (6,912 bytes)
- 4. Re: [6pack] Idle after carb rebuild (score: 1)
- Author: "John North" <johncnorth@gmail.com>
- Date: Sun, 10 Jun 2007 20:59:32 -0400
- David, yes, these are Z-S, the carbs are numbered C3385, which I believe makes them from a 71, but I have them on my 76. Oddly there are two vacuum ports on the rear carb. They are both close to the
- /html/6pack/2007-06/msg00062.html (7,609 bytes)
- 5. Re: [6pack] Idle after carb rebuild (score: 1)
- Author: DLylis@aol.com
- Date: Mon, 11 Jun 2007 07:42:53 EDT
- I am not the expert here but have rebuilt a few Z-S carbs. After a total rebuild sans throttle shaft bushes I still could not get the idle to drop. Same symptom as you describe. Snap the throttle and
- /html/6pack/2007-06/msg00063.html (8,928 bytes)
- 6. Re: [6pack] Idle after carb rebuild (score: 1)
- Author: DLylis@aol.com
- Date: Mon, 11 Jun 2007 07:48:38 EDT
- Also, take a look at _TR3driver@ca.rr.com_ (mailto:TR3driver@ca.rr.com) post titled "passing on a plea for help". There may be information in there that can address your issue. David Lylis 69 TR6 CC2
- /html/6pack/2007-06/msg00064.html (6,857 bytes)
This search system is powered by
Namazu