- 1. [Healeys] Carbs overflowing on 60 BN7 (score: 1)
- Author: scott willis <ahpowered@hotmail.com>
- Date: Mon, 13 Sep 2010 21:43:06 -0500
- Last year I pulled my tranny when the car ran perfect. Lots o delays, lack of time, etc. Everything is back together, new points, plugs (replaced tonight), etc. I also swapped out the fuel pump to t
- /html/healeys/2010-09/msg00363.html (7,641 bytes)
- 2. Re: [Healeys] Carbs overflowing on 60 BN7 (score: 1)
- Author: Alan Seigrist <healey.nut@gmail.com>
- Date: Tue, 14 Sep 2010 11:01:42 +0800
- Grose Jets / ball jets don't work if you have crud in the tank. I suspect you have some rust floating around and it has clogged up your ball valves causing them to stick open. I'd suggest taking the
- /html/healeys/2010-09/msg00365.html (8,938 bytes)
- 3. Re: [Healeys] Carbs overflowing on 60 BN7 (score: 1)
- Author: Bob Spidell <bspidell@comcast.net>
- Date: Mon, 13 Sep 2010 20:06:01 -0700
- On a similar note, our BN2's front carb leaks. It has new, brass-tipped needle valves--anybody having trouble with these as well (the tank and fuel lines are new/cleaned)? bs -- ** Bob Spidell San Jo
- /html/healeys/2010-09/msg00366.html (7,560 bytes)
- 4. Re: [Healeys] Carbs overflowing on 60 BN7 (score: 1)
- Author: Alan Seigrist <healey.nut@gmail.com>
- Date: Tue, 14 Sep 2010 11:23:57 +0800
- My experience is the rubber ones seal better, but then don't last more than 5-ish years then start leaking. The brass ones will last longer, but if they aren't made correctly they will leak. The Gro
- /html/healeys/2010-09/msg00367.html (8,136 bytes)
- 5. Re: [Healeys] Carbs overflowing on 60 BN7 (score: 1)
- Author: Bob Spidell <bspidell@comcast.net>
- Date: Mon, 13 Sep 2010 20:50:32 -0700
- Electronic SU--same as 'stock,' but Hall Effect electronic switch instead of points. Should be correct pressure, since it's determined by the strength of the spring, and that shouldn't be different t
- /html/healeys/2010-09/msg00368.html (8,811 bytes)
- 6. Re: [Healeys] Carbs overflowing on 60 BN7 (score: 1)
- Author: Alan Seigrist <healey.nut@gmail.com>
- Date: Tue, 14 Sep 2010 11:55:53 +0800
- Replace the jets then... after you make sure the floats don't have a leak! Many new jets don't work properly ... :( Cheers, Alan -- Sent from my mobile device _______________________________________
- /html/healeys/2010-09/msg00369.html (9,395 bytes)
- 7. Re: [Healeys] Carbs overflowing on 60 BN7 (score: 1)
- Author: "Greg Lemon" <glemon@neb.rr.com>
- Date: Mon, 13 Sep 2010 22:56:14 -0500
- I had similar problems when I used a Facet low pressure pump in my Healey, I rebult the SU and all was well, I kept the newer pump as a spare. Greg Lemon _____________________________________________
- /html/healeys/2010-09/msg00370.html (7,602 bytes)
- 8. Re: [Healeys] Carbs overflowing on 60 BN7 (score: 1)
- Author: "Don" <don@anglesey.us>
- Date: Tue, 14 Sep 2010 08:52:03 -0600
- I have used the Facet successfully for years with no carb overflow problems. I have replaced two over those years and they usually just stop pumping fuel. I have also used a Carter which puts out a
- /html/healeys/2010-09/msg00375.html (8,370 bytes)
This search system is powered by
Namazu