- 1. [Healeys] door problem (score: 1)
- Author: <healeymanjim@hansencc.net>
- Date: Tue, 14 Sep 2010 05:35:50 +0000
- rebuilt my door hinges recently on the bj8 and now have a problem with one door not shutting properly. driver side door has to be shut by putting it a certain distance(approx 9 inches) then pulling i
- /html/healeys/2010-09/msg00372.html (7,249 bytes)
- 2. Re: [Healeys] door problem (score: 1)
- Author: Alan Seigrist <healey.nut@gmail.com>
- Date: Tue, 14 Sep 2010 14:14:30 +0800
- Did you move the door hinge plates out on the A pillar? Have you put on new door seals? I'd check there first. -- Sent from my mobile device _______________________________________________ Healeys@au
- /html/healeys/2010-09/msg00373.html (7,915 bytes)
- 3. Re: [Healeys] door problem (score: 1)
- Author: David Nock <healeydoc@sbcglobal.net>
- Date: Tue, 14 Sep 2010 09:05:21 -0700
- If all was fine before the hinges were repaired and the latches are not the problem then I would say that the most likly thing is the repaired hinge is binding. David Nock British Car Specialists Sto
- /html/healeys/2010-09/msg00379.html (8,555 bytes)
- 4. Re: [Healeys] door problem (score: 1)
- Author: "Dan Stromquist" <dan@warner-associates.com>
- Date: Tue, 14 Sep 2010 11:44:55 -0500
- Look at the inside weather stripping that hits on the door. If it hits on the door panel to hard it will cause problems with your door shutting. You can bend the metal the weather stripping goes ove
- /html/healeys/2010-09/msg00380.html (8,680 bytes)
- 5. Re: [Healeys] door problem (score: 1)
- Author: Al Malin <amalin@mac.com>
- Date: Tue, 14 Sep 2010 15:05:49 -0400
- Double check the tongue for excessive wear. The one on my driver door was worn to the point that it easily disengaged from the striker plate on the B pillar. Al Malin Tricarb a door http://autox.team
- /html/healeys/2010-09/msg00381.html (8,947 bytes)
This search system is powered by
Namazu