Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TR\]\s+TR6\s+new\s+Solenoid\s+problem\s+\-\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TR\]\s+TR6\s+new\s+Solenoid\s+problem\s+\-\s*$/: 6 ]

Total 6 documents matching your query.

1. [TR] TR6 new Solenoid problem - (score: 1): Author: Jim Barbuscia <jimbar@centurytel.net>; Date: Tue, 26 Sep 2006 18:06:29 -0700; Hello All, Ran into something new today. Just installed a new solenoid and now the motor starts great but as soon as I let off the key the motor stops running.Wires are in the same location as before; /html/triumphs/2006-09/msg00387.html (7,593 bytes)
2. RE: [TR] TR6 new Solenoid problem - (score: 1): Author: "Randall" <tr3driver@comcast.net>; Date: Tue, 26 Sep 2006 18:37:48 -0700; Possible (depending on how it was disconnected) but not likely, IMO. I'm assuming from your comments that this is a 74-75 TR6 with the seat belt interlock to the starter and a relay to control the s; /html/triumphs/2006-09/msg00388.html (8,634 bytes)
3. RE: [TR] TR6 new Solenoid problem - (score: 1): Author: "StevesTR6" <stevestr6@verizon.net>; Date: Tue, 26 Sep 2006 19:24:49 -0700; Hi JimWhen this happened to mine, it was from worn contacts in the ignition switch. As soon as I let go of the key, it would snap back from the spring force and that would break contact in the igniti; /html/triumphs/2006-09/msg00389.html (7,478 bytes)
4. Re: [TR] TR6 new Solenoid problem - (score: 1): Author: pethier@comcast.net; Date: Wed, 27 Sep 2006 04:37:59 +0000; Do you have a balast resister? It may be open. -- Phil Ethier West Side Saint Paul Minnesota USA 1962 Triumph TR4 CT2846L, 1992 Saturn SL2, 1993 Suburban, 1994 Miata C package pethier [at] comcast [d; /html/triumphs/2006-09/msg00390.html (8,191 bytes)
5. RE: [TR] TR6 new Solenoid problem - (score: 1): Author: "Randall" <tr3driver@comcast.net>; Date: Wed, 27 Sep 2006 18:07:38 -0700; You're quite welcome, Jim. Just so you will know, the purpose of the white/yellow is to short out the ballast resistor during starting. This delivers more voltage to the coil (since the battery volt; /html/triumphs/2006-09/msg00403.html (7,552 bytes)
6. Re: [TR] TR6 new Solenoid problem - (score: 1): Author: Jim Barbuscia <jimbar@centurytel.net>; Date: Wed, 27 Sep 2006 17:30:55 -0700; Big Thanks to Randall! Pulling that yellow/white wire did the trick! I guess the new solenoid is wired differently. She now starts and runs like the champ she is. -jim 76 TR6 P.S. If your ever in Sea; /html/triumphs/2006-09/msg00404.html (9,354 bytes)

Current List: 1 - 6
Page: [1]