Well, I loaned Sparky ('54 3100) to my wife to haul hay last week, any way, long story short she called me from steep driveway with 10 wet bales in the back and the 3 speed tranny stuck in third. Ask
Sounds like time to have wife help you install a clutch> Greg in Fla 56 short --Original Message-- From: BDober@aol.com <BDober@aol.com> To: oletrucks@autox.team.net <oletrucks@autox.team.net> Date:
Sounds like she glazed the clutch disc. Unlike glazing a ham or doughnut this is not a good thing! Best case scenario: Drive it for awhile it may work out. Worst case scenario: replace clutch disc, p
Sounds like you burned/scored the pressure plate. I had the same thing happen my '64 Chev truck...when I took it out, the plate looked like someone was experimenting with a new art form involving a t
I think an engine mount let go, maybe the tranny mount, but look at the mount next to master cyl first. That one tends to tear off during high torque situations. Bob ADler oletrucks is devoted to Ch
Also check your motor/tranny mounts. Doubt it is the through out bearing but you are correct it may be pressure plate or disc. Grant 50 Chevy 3100 52 GMC 150 oletrucks is devoted to Chevy and GM truc
<< But when engaging first gear and letting the clutch out the whole thing shakes until it starts rolling I think an engine mount let go, maybe the tranny mount, but look at the mount next to master