Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*BJ8\s+window\s+rail\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*BJ8\s+window\s+rail\s*$/: 7 ]

Total 7 documents matching your query.

1. BJ8 window rail (score: 1): Author: "Freese, Ken" <Kendall.Freese@Aerojet.com>; Date: Tue, 23 May 2006 16:08:18 -0700; The bottom rail that holds the roller has come off the window frame. Should I line the rail with a thin rubber sheet and then push it back on to the window frame? Ken Freese 65 BJ8; /html/healeys/2006-05/msg00707.html (6,554 bytes)
2. RE: BJ8 window rail (score: 1): Author: "Ned Smith" <smithn00@kitepilot.net>; Date: Tue, 23 May 2006 19:42:52 -0400; Ned Smith BJ8 near Chattanooga, TN N34.98 W85.5 The bottom rail that holds the roller has come off the window frame. Should I line the rail with a thin rubber sheet and then push it back on to the w; /html/healeys/2006-05/msg00709.html (6,839 bytes)
3. RE: BJ8 window rail (score: 1): Author: <pennell@cox.net>; Date: Tue, 23 May 2006 20:20:19 -0400; Ken and Ned, I would add that it may require some tapping with a rubber mallet or wood block and hammer. Keith Pennell; /html/healeys/2006-05/msg00711.html (7,177 bytes)
4. Re: BJ8 window rail (score: 1): Author: John Loftus <loftusdesign@cox.net>; Date: Tue, 23 May 2006 18:02:50 -0700; I believe the glass was originally held with Everseal glazing strips. Moss carries a glazing strip but I found it too thick when trying to install new door glass. You should be able to find thinner; /html/healeys/2006-05/msg00713.html (7,505 bytes)
5. RE: BJ8 window rail (score: 1): Author: "Ned Smith" <smithn00@kitepilot.net>; Date: Wed, 24 May 2006 07:56:53 -0400; I used long clamps to draw the pieces together. Ned Smith BJ8 near Chattanooga, TN N34.98 W85.5 Ken and Ned, I would add that it may require some tapping with a rubber mallet or wood block and hammer; /html/healeys/2006-05/msg00724.html (8,047 bytes)
6. RE: BJ8 window rail (score: 1): Author: "Freese, Ken" <Kendall.Freese@Aerojet.com>; Date: Wed, 24 May 2006 07:04:46 -0700; I am not concerned with the glass to frame, I need to keep the 6 inch rail attached to the frame. I am trying to avoid taking the frame out of the car again. I am hoping I can insert some rubber into; /html/healeys/2006-05/msg00727.html (8,544 bytes)
7. Re: BJ8 window rail (score: 1): Author: "Alan Seigrist Blue 100" <healey.nut@gmail.com>; Date: Thu, 25 May 2006 10:41:45 +0800; I repeat - DO NOT put rubber on the rail inbetween the frame and the rail. The rail will come off if you do this. It is a metal to metal force fit. Regards, Alan '53 BN1 '64 BJ8 On 5/24/06, Freese,; /html/healeys/2006-05/msg00746.html (9,263 bytes)

Current List: 1 - 7
Page: [1]