- 1. HS6 carbs for TR3A (score: 1)
- Author: "Richard Alexander" <RALEXANDER@smail.umaryland.edu>
- Date: Mon, 03 Oct 2005 14:39:22 -0400
- I have a pair of HS6 SU carbs in great shape that came with a bunch of parts when I bought my 58 TR3A. Someone told me that these carbs (probably from a TR4A) will work great on my TR3A if I have the
- /html/triumphs/2005-10/msg00069.html (7,311 bytes)
- 2. RE: HS6 carbs for TR3A (score: 1)
- Author: "Randall" <tr3driver@comcast.net>
- Date: Mon, 3 Oct 2005 14:34:06 -0700
- IMO yes, even on your TR3A manifold. The HS6 design eliminates those troublesome cork O-rings on the jet, and the likewise short lived rubber mounts for the float bowl. In addition, the throttle sha
- /html/triumphs/2005-10/msg00076.html (8,577 bytes)
- 3. RE: HS6 carbs for TR3A (score: 1)
- Author: "Randall" <tr3driver@comcast.net>
- Date: Mon, 3 Oct 2005 14:49:45 -0700
- Oops, my bad ... it's been pointed out to me that the original TR4A setup used a rod instead of the two headed cable found on later Triumphs. My HS6 carbs were setup for two cables, but they came fr
- /html/triumphs/2005-10/msg00077.html (7,100 bytes)
- 4. Re: HS6 carbs for TR3A (score: 1)
- Author: Dave1massey@cs.com
- Date: Mon, 3 Oct 2005 18:03:38 EDT
- If you can get the throttle and choke linkages from the TR4A from whence they came you will be miles ahead. I fabricated my own and it was a fair bit of fiddly work with some resources I had availabl
- /html/triumphs/2005-10/msg00078.html (7,766 bytes)
This search system is powered by
Namazu