Bruce,
By 90 degree turn, do you mean a 90' twist is needed in the new
receptical to get it in the same alignment (vertical) as the original?
Possibly one of the 'eye' type found in TR4 to early 6s would work. They
bolt to the floor and could turn to provide the needed orientation - if that
is the problem.
Jeff
CF 13816U
----- Original Message -----
From: "Bruce Simms" <brucesimms2003@yahoo.ca>
To: "Alan Salvatore" <asalvato@tampabay.rr.com>
Cc: "6pack" <6pack@autox.team.net>
Sent: Tuesday, November 04, 2003 12:20 AM
Subject: Re: Securon Seat Belt Installation
> Thanks Al, but my original recepical is unsafe due to very rough
condition. There's likely some piece of hardware that could be bolted to
the floor that you would then attach the stalk to. The hardware piece would
provide the 90 degree turn in the recepticle stalk.
>
> Those with more experience may be able to suggest a simple solution.
>
> Regards, Bruce Simms CF1941UO
|