Elongated in the stock brackets, that's good to know as I thought it might be
due to the design of the adjustable brackets. As one side of the bolt doesn't
have anything to hold it in place, unless you include the tightening of the
bolt.
----- Original Message -----
From: Hugh Barber<mailto:tr6nut@verizon.net>
To: Richard Seaton<mailto:rsh17@msn.com>
Cc: 6 Pack<mailto:6pack@autox.team.net>
Sent: Monday, September 11, 2006 6:00 PM
Subject: Re: sorry not Good parts TA bushings!! but Urethane bushings
Richard Seaton wrote:
> oopps, the bushings were urathane bushings as Good doesn't sell urethane
> ones,
>
Richard,
I had a set of the polyurethane TA bushings that elongated just as yours
did. I replaced them with Richard Good's nylatron bushings and so far -
so good (no pun intended).
The poly ones were used with stock brackets when they elongated.
Hope this helps,
Hugh Barber
Stafford, VA
'73 TR6
|