6pack
[Top] [All Lists]

Re: [6pack] Gunst Bearing compatibility with Sachs clutch

To: r_rochlin@hotmail.com (Bob Rochlin)
Subject: Re: [6pack] Gunst Bearing compatibility with Sachs clutch
From: tr6taylor@webtv.net (Sally or Dick Taylor)
Date: Wed, 10 Oct 2007 11:28:43 -0700
 Bob---I have never used the Sachs with the Gunst, but if your info says
this pressure plate is compatible with the TOYO or the RHP bearing, the
Gunst bearing should work as well.

Dick
From:

r_rochlin@hotmail.com(Bob Rochlin)

I appreciate the response to my email re: Luc clutches. From the
response I've gotten it seems that the softest clutch pedal is obtained
by using the Sachs pressure plate and that the clamping pressure of the
Sachs pressure plate is more than adequate for a street car. My question
is, will the Sachs pressure plate be compatible with the Gunst T/O
bearing I have?  
Is anyone running the Sachs pressure plate and the Gunst bearing?
According to one source the Sachs pressure plate is only compatible with
two T/O bearings, I believe Toyo being one (web site only gave stock
numbers). Any information appreciated.
Take care.
Bob Rochlin
'72 TR6




<Prev in Thread] Current Thread [Next in Thread>