6pack
[Top] [All Lists]

Re: [6pack] Fw: New springs - Help!

To: richard.r.olson@faa.gov, 6pack@autox.team.net
Subject: Re: [6pack] Fw: New springs - Help!
From: Greg Perry <rgperry@earthlink.net>
Date: Mon, 22 Oct 2007 17:22:11 -0500 (GMT-05:00)
Rick,

The lower control arm needs to be vertical with respect to the ground.  This 
will give you access to the inner nuts.  With the weight of the car supported 
with a jack stands on the frame, I use a section of 2" x 4" to support the 
control arm under the trunnion so that the arm is about vertical.  Greg Perry

>Q2  -
>The bigger only - The spring pan, my tool with a 1" X 3" alum, 1/2"
>threaded, nuts and the spring is IN
>but not much compressed.  But I can't get the 2 nuts on the inner sides
>(close to the frame).
>
>How can I do this?
>
>Thank,
>Rick Olson ("being carefull!")




<Prev in Thread] Current Thread [Next in Thread>