Kevin wrote:
> Another thing that was considered was the droop in the lower
> bushing on the Bilstein - since it had been on the car, it had been
> 'squished' (I know, a technical term :-) up, thus minimally lowering the
> car, so that has to be taken into consideration when comparing against a
> never installed shock.
>
>
I have two Miata R packages and was surprised about how much
difference the measurement was on versus off the cars due to the
Bilstein bushing "squish". I also had to add an extra shim on my Konis
after measuring them off the car.
Jim Hedderick
Houston
|