On Thursday, January 28, 1999 12:15 AM, Alan Dahl wrote:
>BTW anyone considering the Mazdaspeed shocks should know the front perches
>are 2mm too high (which is ok) and the rears are 2mm too low. I solved this
>by adding a 3mm shim under the perches on the rear shocks. Make sure you
>get it right, the perch heights on the '99s were examined at two events
>(Denver and Nationals) this year.
This only applies to the '99 Sport model. The Mazdaspeed shocks fit my
non-Sport '99 quite nicely, thank you!
Bob Purcell
|