At 10:33 AM 8/31/99 -0400, R. John Lye wrote:
>Hi all,
> I know that this thread went around a year or two ago, and
>I thought that I had saved the information, but I guess I didn't.
>So, sorry for the repeat. Anyway, do any of you know of sources
>for getting steel wheels widened? This could either be by splitting
>the outer rim and welding a spacer in, or better yet, by welding the
>wheel center into a new rim? This is for an MGA Twin Cam which uses
>rare, pin drive wheels so buying aftermarket wheels is not a
>possibility.
I don't have specifics, but this doesn't sound like it couldn't
be handled by any COMPETENT machine/welding shop. Emphasis on Competent.
|