autox
[Top] [All Lists]

Re: Smaller front bar for an SE-R?

To: "Pat Griffith" <slowse-r@gimail.af.mil>, <autox@autox.team.net>
Subject: Re: Smaller front bar for an SE-R?
From: "Eric Linnhoff" <eric10mm@qni.com>
Date: Tue, 18 Jul 2000 00:21:37 -0500
Also, check out www.se-r.net for all things Sentra.

Eric Linnhoff in KC
#69DS    TLS #13
'98 Neon R/T
<eric10mm@qni.com>

"I ask sir, who is the militia? It is the whole people...
To disarm the people, that is the best and most
effective way to enslave them..." - George Mason
-----Original Message-----
From: Pat Griffith <slowse-r@gimail.af.mil>
To: autox@autox.team.net <autox@autox.team.net>
Date: Tuesday, July 18, 2000 12:22 AM
Subject: Re: Smaller front bar for an SE-R?


>> Does anyone out there know of a SMALLER that stock
>> front anti-sway bar for a 91 Sentra SE-R?
>
>A bar from a 91-94 1.6L Sentra would work.  It actually has a larger
diameter than an SE-R sway bar, but it's hollow so it works like it's
"smaller."  The 1.6L bar is noticeably lighter than an SE-R sway bar.  You
can probably find one at a junk yard (like I did :).
>
>I tried one on my SE-R for a little while but didn't like it.  It seemed
like the front tires (Kumhos) rolled over on the sidewalls a bit too much.
But I think it could work if you could get a lot of negative camber, like
more than 2 degrees.  I could never get more than about 1.5.
>
>Pat
>'93 Sentra SE-R, DSP/STS/STR/Tracktoy
>


<Prev in Thread] Current Thread [Next in Thread>