That leaves one thing, The pertronix unit,
Here is a test procedure for it
http://www.ttalk.info/Tech/PerNegGndTest.htm
On 10/18/2007 1:01:42 AM, Greg Schroeder (gschroeder@comcast.net) wrote:
>> then trying to start the car. I changed out the coil, rotor cap,
> distributor
> and still no starting.
>
> I tested all the fuses and verfied they were OK. All electical appears to
> be
> fine.
>
> Any other suggestions? Secret safety device that will allow the engine
> to
> crank and not start? I had not had an issue like this where everything
> worked
> and the car would not start. I had the fusible link at the ammeter issue,
> but
> nothing would work when that occured.
>
> Greg 0036
|