Re: MG Midget Clutch Release Bearing

[Glenn Stauffer <stauffer@cc.swarthmore.edu>]

>       On another subject, I'm derus   ting all the suspension bits using a 
>wire
>       brush, steel wool, and acid. 
>
>Eastwood sells a nice wheel for use with a drill that's basically
>looseweave scotchbrite plastered with silicon carbide. Really good at
>getting anything off, leaves a finish like 80 grit sandpaper.
>
>Name:        Eastwood Company
>Address:     580 Lancaster Avenue
>             Box 296
>             Malvern, PA 19355
>Phone:       (800) 345-1178

Thanks.  Eastwood is real close to me.