Don't know about other trades but in the toolmaking busines where there is a
need for some very fine grits "emery" always denoted the coarser grades down
to 800 and crocus cloth was much finer. I would consider using the 1500 or
2000 grit wet or dry used for wet sanding and using light oil to soften the
cut even more if necessary.
Ron
----- Original Message -----
From: Patrick P. Castronovo <slick1@mohaveaz.com>
To: datsunmike <datsunmike@nyc.rr.com>; Datsun Roadster List
<datsun-roadsters@autox.team.net>
Sent: Sunday, August 12, 2001 1:21 PM
Subject: Re: Crocus Sandpaper
> Try asking for Emery Paper. One in the same. Pat
>
> ----- Original Message -----
> From: datsunmike <datsunmike@nyc.rr.com>
> To: Datsun Roadster List <datsun-roadsters@autox.team.net>
> Sent: Sunday, August 12, 2001 11:49 AM
> Subject: Crocus Sandpaper
>
>
> > Well I never heard of the stuff but my friend suggested I buy some if my
> > crank was lightly scuffed. He said it sounds like con rod bearing.
> >
> > Anyway I went to 2 good autoparts stores and neither place had any but
> they
> > did hear of it.
> >
> > Can anyone spare some or suggest where I can get some?
> >
> > Mike
|