datsun-roadsters
[Top] [All Lists]

Re: Distributor help needed

To: <RIckSRL@cs.com>, <datsun-roadsters@autox.team.net>
Subject: Re: Distributor help needed
From: "datsunmike" <datsunmike@nyc.rr.com>
Date: Tue, 14 Aug 2001 06:51:01 -0400
Rick,

The light spring goes on the short slot and the heavy spring goes on the
long slot.

I also have a 7.5 cam that has 2 equal slots as well. Go figure.

Mike

----- Original Message -----
From: <RIckSRL@cs.com>
To: <datsun-roadsters@autox.team.net>
Sent: Monday, August 13, 2001 9:21 PM
Subject: Distributor help needed


> I have a re-curved distributor and I need some information on the type and
> orientation of the weight springs.
> Are the weight springs the same? If not, where does the light one go in
> relationship to the distributor cam? Or are they of the same thickness?
> I'm ordering  both part numbers mentioned in a Tom Walter FAQ about
> rebuilding distributors, but he doesn't mention what goes where, when or
why.
> Seems to me they should be both the same, but I noticed the big difference
> between the 17.5 and 7.5 distributor cams was the length and the
orientation
> of the slots in the cams. Maybe the lighter spring allows for a quicker
> advance and the heavier one kicks in at higher RPMs?
> As always, thanks.
>
> Rick Stayner
> 69 2000
> Harrisburg, Pa

<Prev in Thread] Current Thread [Next in Thread>