Are they still available? Part No?
Mike
----- Original Message -----
From: "Adam Bradley" <ambradley@yahoo.com>
To: "datsunmike" <datsunmike@nyc.rr.com>; "Victor Laury"
<vlaury@earthlink.net>; "Michael Ibarra" <MIbarra@DRL-USA.COM>
Cc: <datsun-roadsters@autox.team.net>
Sent: Friday, March 29, 2002 10:52 AM
Subject: Re: Ever Think Of Replacing That Filler Neck On Your 1600?
> Another option is an RL411 elbow which fits right on as it has the same
> engine/head.
>
> --- datsunmike <datsunmike@nyc.rr.com> wrote:
> > On the aluminum heads I use a 240Z thermo elbow with slight
> > modifications
> > and dump the entire 1600 filling system. Much cleaner look and it
> > works
> > well. The necks are about $8 new from Nissan.
> >
> > Mike
> >
> > ----- Original Message -----
> > From: "Victor Laury" <vlaury@earthlink.net>
> > To: "Michael Ibarra" <MIbarra@DRL-USA.COM>
> > Cc: <datsun-roadsters@autox.team.net>
> > Sent: Thursday, March 28, 2002 11:30 PM
> > Subject: Re: Ever Think Of Replacing That Filler Neck On Your 1600?
> >
> >
> > > SoCal Local, Mike Ibarra has made up a custom filler neck for
> > 1600's
> > running
> > > 2L Radiators. Prett cool looking, with the Datsun "D" cut into the
> > top.
> > > Since the list wont accept his photos, please email Mike at
> > > MIbarra@DRL-USA.COM .
> > >
> > > Here's his post to the SoCalROC distribution list
> > >
> >
> --------------------------------------------------------------------------
> > > We'll I'm going to try this just one's I have found a machine shop
> > that
> > will
> > > do a short run of this units, If you have purchased a 2000 Radiator
> > and
> > you
> > > ended up having three filler caps in your roadster this might just
> > solve
> > the
> > > problem. He made this one as a sample, If any of you want's to
> > purchase
> > one
> > > I can have him make about 7 of them. I bought the raw material and
> > the
> > > machine time. He's charging $75.00 for each them I have attached a
> > few
> > > photos this is a milled part, not casted have a Custom Look On Your
> > Car.
> > > First 7 gets them please only one per person. I want other to have
> > a
> > chance
> > > too. The dash is still being made at this time. It will have
> > optional
> > > anodizing Solid Aluminum With functional Aluminum Glove Box.
> > >
> > > Mike Ibarra
> > >
> > > /// datsun-roadsters@autox.team.net mailing list
> > > /// Send admin requests to majordomo@autox.team.net or go to
> > > /// http://www.team.net/cgi-bin/majorcool
> > > /// Send list postings to datsun-roadsters@autox.team.net
> >
> > /// datsun-roadsters@autox.team.net mailing list
> > /// Send admin requests to majordomo@autox.team.net or go to
> > /// http://www.team.net/cgi-bin/majorcool
> > /// Send list postings to datsun-roadsters@autox.team.net
> >
>
>
> =====
> Thanks,
>
> Adam Bradley
> '70 Datsun 1600 Roadster SPL311-28181
> '66 Datsun PL411 sedan PL411-022447
> http://www.picturetrail.com/abend
> Yahoo! Greetings - send holiday greetings for Easter, Passover
>
> /// datsun-roadsters@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net or go to
> /// http://www.team.net/cgi-bin/majorcool
> /// Send list postings to datsun-roadsters@autox.team.net
/// datsun-roadsters@autox.team.net mailing list
|