datsun-roadsters
[Top] [All Lists]

Re: Ever Think Of Replacing That Filler Neck On Your 1600?

To: datsunmike <datsunmike@nyc.rr.com>, Victor Laury
Subject: Re: Ever Think Of Replacing That Filler Neck On Your 1600?
From: Adam Bradley <ambradley@yahoo.com>
Date: Fri, 29 Mar 2002 07:52:44 -0800 (PST)
Another option is an RL411 elbow which fits right on as it has the same
engine/head.

--- datsunmike <datsunmike@nyc.rr.com> wrote:
> On the aluminum heads I use a 240Z thermo elbow with slight
> modifications
> and dump the entire 1600 filling system. Much cleaner look and it
> works
> well. The necks are about $8 new from Nissan.
> 
> Mike
> 
> ----- Original Message -----
> From: "Victor Laury" <vlaury@earthlink.net>
> To: "Michael Ibarra" <MIbarra@DRL-USA.COM>
> Cc: <datsun-roadsters@autox.team.net>
> Sent: Thursday, March 28, 2002 11:30 PM
> Subject: Re: Ever Think Of Replacing That Filler Neck On Your 1600?
> 
> 
> > SoCal Local, Mike Ibarra has made up a custom filler neck for
> 1600's
> running
> > 2L Radiators. Prett cool looking, with the Datsun "D" cut into the
> top.
> > Since the list wont accept his photos, please email Mike at
> > MIbarra@DRL-USA.COM .
> >
> > Here's his post to the SoCalROC distribution list
> >
>
--------------------------------------------------------------------------
> > We'll I'm going to try this just one's I have found a machine shop
> that
> will
> > do a short run of this units, If you have purchased a 2000 Radiator
> and
> you
> > ended up having three filler caps in your roadster this might just
> solve
> the
> > problem. He made this one as a sample, If any of you want's to
> purchase
> one
> > I can have him make about 7 of them. I bought the raw material and
> the
> > machine time. He's charging $75.00 for each them I have attached a
> few
> > photos this is a milled part, not casted have a Custom Look On Your
> Car.
> > First 7 gets them please only one per person. I want other to have
> a
> chance
> > too. The dash is still being made at this time. It will have
> optional
> > anodizing Solid Aluminum With functional Aluminum Glove Box.
> >
> > Mike Ibarra
> >
> > ///  datsun-roadsters@autox.team.net mailing list
> > ///  Send admin requests to majordomo@autox.team.net  or go to
> > ///  http://www.team.net/cgi-bin/majorcool
> > ///  Send list postings to datsun-roadsters@autox.team.net
> 
> ///  datsun-roadsters@autox.team.net mailing list
> ///  Send admin requests to majordomo@autox.team.net  or go to
> ///  http://www.team.net/cgi-bin/majorcool
> ///  Send list postings to datsun-roadsters@autox.team.net
> 


=====
Thanks,

Adam Bradley
'70 Datsun 1600 Roadster SPL311-28181
'66 Datsun PL411 sedan PL411-022447
http://www.picturetrail.com/abend
Yahoo! Greetings - send holiday greetings for Easter, Passover

///  datsun-roadsters@autox.team.net mailing list


<Prev in Thread] Current Thread [Next in Thread>