fot
[Top] [All Lists]

RE: Forwarded note [ames@cmn.net: RE: fot-digest V1 #361]

To: BillDentin@aol.com, mjb@autox.team.net, fot@autox.team.net
Subject: RE: Forwarded note [ames@cmn.net: RE: fot-digest V1 #361]
From: Bill Babcock <BillB@bnj.com>
Date: Tue, 19 Jun 2001 13:50:36 -0700
Wow, that's good to know. That might have had something to do with the
problem I had last weekend, though the gasket showed no signs of leaking.
I was using a solid copper gasket instead of the usual shim steel. 

-----Original Message-----
From: BillDentin@aol.com [mailto:BillDentin@aol.com]
Sent: Tuesday, June 19, 2001 1:47 PM
To: mjb@autox.team.net; fot@autox.team.net
Subject: Re: Forwarded note [ames@cmn.net: RE: fot-digest V1 #361]


In a message dated 06/19/2001 1:22:11 PM Central Daylight Time, 
mjb@autox.team.net writes:


> Subj: Forwarded note [ames@cmn.net: RE: fot-digest V1 #361]
> Date: 06/19/2001 1:22:11 PM Central Daylight Time
> From:    mjb@autox.team.net (Mark J Bradakis)
> Sender:    owner-fot@autox.team.net
> Reply-to: <A HREF="mailto:mjb@autox.team.net";>mjb@autox.team.net</A>
(Mark J Bradakis)
> To:    fot@autox.team.net
> 
> 
> 
> 
> For some reason, this was sent to me rather than fot@autox.team.net.
> 

Amici:

A six (-6-) core radiator...WOW!

This story brings back memories of a problem we had a few years back.
Just 
because you have a rebuilt engine, you should not ignore the fact that you

may have leaks in the combustion chamber.  We made this mistake a few
years 
back.  It would run nice and cool in the shop, paddock, or even out on the

track...but pour the coals to it, and it would spike up to VERY high 
readings.  We finally found out they were related to head gasket leaks to
the 
cylinders, that would surface periodically under a heavy throttle.  The 
temperature gauge would run cool, and then spike to very HOT readings.  We

ruined a good Comptune head.  We have not had the problem since we began 
using copper wire to form 'O Rings' on the head gasket.

Bill Dentinger

<Prev in Thread] Current Thread [Next in Thread>