fot
[Top] [All Lists]

RE: Speedbleeders

To: "'Rocky Entriken'" <rocky@tri.net>, WEmery7451@aol.com, mcandrew@pol.net,
Subject: RE: Speedbleeders
From: Bill Babcock <BillB@bnj.com>
Date: Sun, 13 Mar 2005 08:43:12 -0800
www.speedbleeders.com  The ones for Tiltons or wilwood superlights fit
Girlings. The tilton small master cylinders are diecast girlings, basically.
All the parts except the outlet fitting (deep AN-3) are interchangeable. 

-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On Behalf
Of Rocky Entriken
Sent: Sunday, March 13, 2005 12:55 AM
To: WEmery7451@aol.com; mcandrew@pol.net; fot@autox.team.net
Subject: Re: Speedbleeders

Bruce Wentzel sells them. He'd know.

Not on FOT list (he's a Corvette guy). I got mine from him 2-3 years ago.

Bruce is at greendot1@comcast.net.

Or you can get them from Solo Performance Specialties --
www.soloperformance.com -- tell him (Dave Whitworth) what your car is and he
supplies the part.

--Rocky Entriken

----- Original Message -----
From: <WEmery7451@aol.com>
To: <mcandrew@pol.net>; <fot@autox.team.net>
Sent: Sunday, March 13, 2005 12:24 AM
Subject: Re: Speedbleeders


> In a message dated 3/12/05 4:39:37 PM Pacific Standard Time, 
> mcandrew@pol.net
> writes:
>
> << Does anyone use and/or know the part numbers for Speedbleeders for 1957
> TR3 Girling brakes/clutch hydraulics >>
>
> I imagine that you are talking about something more exotic than this.
> Advanced Auto Parts stores sell an inexpensive vacuum pump for bleeding 
> brakes and
> hydraulic clutches.  Connect the hose to the bleed valve, open the bleed 
> valve,
> suck out brake fluid until the bubbles disappear, and close the bleed 
> valve.
> It has worked very well for me, especially since the three kids are gone, 
> and
> my wife has no desire to pump the brake and clutch peddles.

<Prev in Thread] Current Thread [Next in Thread>