I's www.speedbleeder.com ..... no 's' on the end.... ---Justin
Bill Babcock wrote:
>www.speedbleeders.com The ones for Tiltons or wilwood superlights fit
>Girlings. The tilton small master cylinders are diecast girlings, basically.
>All the parts except the outlet fitting (deep AN-3) are interchangeable.
>
>-----Original Message-----
>From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On Behalf
>Of Rocky Entriken
>Sent: Sunday, March 13, 2005 12:55 AM
>To: WEmery7451@aol.com; mcandrew@pol.net; fot@autox.team.net
>Subject: Re: Speedbleeders
>
>Bruce Wentzel sells them. He'd know.
>
>Not on FOT list (he's a Corvette guy). I got mine from him 2-3 years ago.
>
>Bruce is at greendot1@comcast.net.
>
>Or you can get them from Solo Performance Specialties --
>www.soloperformance.com -- tell him (Dave Whitworth) what your car is and he
>supplies the part.
>
>--Rocky Entriken
>
>----- Original Message -----
>From: <WEmery7451@aol.com>
>To: <mcandrew@pol.net>; <fot@autox.team.net>
>Sent: Sunday, March 13, 2005 12:24 AM
>Subject: Re: Speedbleeders
>
>
>
>
>>In a message dated 3/12/05 4:39:37 PM Pacific Standard Time,
>>mcandrew@pol.net
>>writes:
>>
>><< Does anyone use and/or know the part numbers for Speedbleeders for 1957
>>TR3 Girling brakes/clutch hydraulics >>
>>
>>I imagine that you are talking about something more exotic than this.
>>Advanced Auto Parts stores sell an inexpensive vacuum pump for bleeding
>>brakes and
>>hydraulic clutches. Connect the hose to the bleed valve, open the bleed
>>valve,
>>suck out brake fluid until the bubbles disappear, and close the bleed
>>valve.
>>It has worked very well for me, especially since the three kids are gone,
>>and
>>my wife has no desire to pump the brake and clutch peddles.
|