fot
[Top] [All Lists]

Re: [Fot] Early (shorter) rear axles in square-tail Spit?

To: <herald948@aol.com>, <fot@autox.team.net>
Subject: Re: [Fot] Early (shorter) rear axles in square-tail Spit?
From: "Barr, Scott" <sbarr@McCarty-Law.com>
Date: Thu, 13 Sep 2007 09:01:29 -0500
Wow, I didn't know the track difference was 2 inches.  That seems like a lot.  
Certainly a lot to make up with wheel spacers...


----- Original Message -----
From: herald948@aol.com <herald948@aol.com>
To: Barr, Scott; fot@autox.team.net <fot@autox.team.net>
Sent: Thu Sep 13 08:59:44 2007
Subject: Re: [Fot] Early (shorter) rear axles in square-tail Spit?

-----Original Message-----
From: Barr, Scott <sbarr@McCarty-Law.com>

Would the shorter (narrower track) swing axles from an earlier car work
on a later Spitfire if I swapped the spring along with the axles?

The narrower track would not be ideal, I'm sure, but would it get us
some laps?

==AM==
I don't think you'd need to switch springs, but there are differences 
in radius rods and/or mounts to the body (not sure which) and in brake 
hydraulic hoses. Also, if the car with the shorter "donor" axles is old 
enough, it might have the smaller flanges to the differential?

Otherwise, it's only a 2" total difference in track width. Maybe that's 
a lot, but possibly a bit of creativity with wheels and/or wheel 
spacers could compensate?

--Andy  Mace

*Mrs Irrelevant: Oh, is it a jet?
*Man: Well, no ... It's not so  much of a jet, it's more your, er, 
Triumph Herald engine with  wings.
 -- Cut-price Airlines Sketch, Monty Python's Flying Circus  (22)

Check out the North American Triumph Sports 6 (Vitesse 6) and Triumph 
Herald Database at its new URL: <http://triumph-herald.us>
________________________________________________________________________
Email and AIM finally together. You've gotta check out free AOL Mail! - 
http://mail.aol.com
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>