Dennis,
I would recommend a 1/16th to 1/8th inch toe in. My TR6 runs a Detroit Locker
and I've found with toe out it wanders at speed. Not so with toe in. Front
camber is set to -1.0. degrees.
Jeff D.
#12 TR6
Sent via BlackBerry by AT&T
-----Original Message-----
From: DennisR380@aol.com
Date: Thu, 14 Feb 2008 14:41:43
To:fot@autox.team.net
Subject: [Fot] TR4 race car front toe number?
I had to pull my steering rack for a rebuild so I need to string the car to
set the toe when I reassemble. Anybody have a suggestion as to how much total
front toe-out to put on a TR4 race car? I have the factory manual but there are
no toe numbers given for stock, or otherwise. I'm thinking 1/8" total
toe-out...or?
Dennis
**************
The year's hottest artists on the red carpet at the
Grammy Awards. Go to AOL Music.
(http://music.aol.com/grammys?NCID=aolcmp00300000002565)
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|