> You know that little brash bush that sits in the back end of the
> crankshaft?
> On my TR3 it sits in there nicely, it's not tight but turn freely?
Mine have all been that way too, AFAIK it's correct.
> Does it get a dab of grease or oil? or could that possibly foul the
> clutch?
I doubt it's necessary with current supply, but I still soak mine in engine
oil overnight.
Back before Oilite was invented, I believe they used simply sintered bronze,
which needed to be soaked. But I believe today it's supplied already oiled.
Still, can't hurt to soak it some more IMO. Dry it with a paper towel or
similar before installing, you don't want oil dripping off the outside.
Randall
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|