fot
[Top] [All Lists]

Re: [Fot] diff dimentions

To: <robertten1@aol.com>, <fot@autox.team.net>
Subject: Re: [Fot] diff dimentions
From: "Norlin Engineering" <norlinengineering@comcast.net>
Date: Wed, 8 Apr 2009 08:07:12 -0700
When I built mine, I had a spare block drilled out.  Unfortunately, I'm 2000
miles away from my shop for the next week or so.  If you can get one of the
steel retainers, you've got the size and the bolt pattern.  You also need to
get the depth and width of the spring slot in the diff so you can match it
on the spacer.  I can get these for you in a week or so if you can wait that
long.

In this same vein, has anyone ever done the math to figure out the
relationship between the arch in the spring, the spacer size and camber?
I'm good with what I've got, but the engineer in me is curious.

-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of robertten1@aol.com
Sent: Monday, March 30, 2009 9:01 PM
To: fot@autox.team.net
Subject: [Fot] diff dimentions


Amici -

Looking for the bolt pattern dimensions?on the early Spitfire rear diff for
mounting the transverse leaf spring to the top of the diff.? I have the 4
bolt dimensions on the late diff?but, I?need the 6 bolt dimensions.? We are
working on some aluminum spacers for a couple Spit/GT6 friends.

Thanks,
Bob T.
'64 Spit GT? autocrosser _______________________________________________
Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Fot] diff dimentions, Norlin Engineering <=