fot
[Top] [All Lists]

Re: [Fot] explaination of fittings...

To: FoT Triumph <fot@autox.team.net>
Subject: Re: [Fot] explaination of fittings...
From: Mark J Bradakis <mark@bradakis.com>
Date: Wed, 10 Mar 2010 23:53:53 -0700
The AN spec ( Army - Navy ) sizes are based on 1/16th of an inch.
A -4 is 4/16ths ID, or 1/4 inch.  -6 is 6/16ths. or 3/8ths.  AN flares
are 37 degree cones, and are good for many make and break cycles
without leaking.

Pegasus ( pegasusautoracing.com ) has some technical info on
their web page, as I recall, which might prove helpful.  I've
not looked at it in a while.


mjb.

_______________________________________________
fot@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>