> My dad always used a shim cut by hand from an aluminum
> soft-drink can
> that fits under the dist. pedistal.
If we're talking about a TRactor motor, there is a procedure in the book for
selecting that shim. I believe it sets the end float for the intermediate
gear between the distributor and the camshaft, which also drives the oil
pump & tach.
-- Randall
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|