Will replacing the TR spring with an AH 3000 spring
get more pressure without the need for shims?
art de armond
-----Original Message-----
From: Randall
Sent: Friday, November 09, 2012 6:54 PM
To: 'Friends'
Subject: Re: [Fot] J-tpe OD enhancements for racing
> Care must be taken to not shim the spring too much as the spring will not
> allow the piston to clear the relief hole at the end of the travel. The
> result
> is disaster! Don't ask how I know.
You too, huh? Just to expand a bit, make sure there is enough travel before
coil bind to fully uncover the relief hole (or holes). The pressure was
fine on the bench ...
Randall
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/fot/riverside@southslope.net
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2221 / Virus Database: 2441/5384 - Release Date: 11/09/12
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|