Re: [Fot] re difference early and late TR6 Cylinder head

[Jeff Durant <jeff_durant@comcast.net>]

To my knowledge, the "narrow" intake port heads came on TR250's and early, '69
to mid-'71 TR6's, with twin Strombergs.  Both my TR250 and '69 TR6 sport this
head as does my brother's '70 TR6.

Sent from my iPhone

On Oct 6, 2014, at 5:26 PM, "Enquiries Road & Track"
<enquiries@roadandtrack.net.au> wrote:

> apart from the TR250 head with its unique port location, there are lots of
> other changes to the 2500 head over the years (it was sued in more than
> jsut TR6). i have a table listing all the valve sizes, casting numbers etc
> if you are interested
>
> i was not aware the TR250 head was used on TR6, but hope someone can
> confirm/refure this with some high degree of confidence
>
> Terry
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/jeff_durant@comcast.net
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive