I don't see any bluing on the ring gear teeth and Greg didn't mention
stinky oil smell. Assuming the setup was correct, I'd like to know where
Greg got the parts. We all have experience with the quality of aftermarket
TR parts. Also what limited slip he was running or a welded diff.
Something may have come loose inside and jammed in the gear mesh. You may
find your answer somewhere in the shrapnel.
On Thu, Sep 6, 2018 at 6:29 AM Bill via Fot <fot at autox.team.net> wrote:
> I doubt if a break-in procedure could have prevented failure, but as
> Marcel says, checking the temperature of the diff could have stopped the
> damage. The likely culprits are incorrect engagement or bad parts, but
> anything that heats the gears enough to cook the oil off the parts will
> kill the gears. I had a close call with one of the gear sets I use.
> Apparently I screwed up somewhere in checking fit?when I pulled the rear
> end to assess the problem there was no backlash. I have a huge finned
> differential cover so checking temperature doesn?t help, but I could feel
> the car slowing quickly between shifts. Fortunately I wasn?t doing my usual
> clutchless shifts and noticed the sudden deceleration every time I
> disengaged the clutch. The gear teeth were slightly blued and the oil
> smelled like a cesspool, but the gears were still usable once I did the
> setup properly.
>
> Bill
>
> > On Sep 5, 2018, at 1:48 AM, van.mulders.marcel--- via Fot <
> fot at autox.team.net> wrote:
> >
> >
> >
> > ----- Doorgestuurd bericht -----
> > Van: "van mulders marcel" <van.mulders.marcel at telenet.be>
> > Aan: "Greg Blake" <gblake58tr3 at icloud.com>
> > Verzonden: Woensdag 5 september 2018 10:47:59
> > Onderwerp: Re: [Fot] Crown and pinion gear break in
> >
> > I think it is good measure to check the heat of the differential casing
> after a few laps when the pinion and crownwheel are freshly mounted : when
> the casing gets very hot, something is wrong : or the parts are bad or they
> are mounted not correctly
> > There are at least 2 manufactures of the TR parts, I forgot about the
> names. As far as I know, used original parts are running cooler than some
> of the aftermarked parts. How was the noise of the diff? Did you notice the
> smell during the first laps?
> > Marcel
> >
> > ----- Oorspronkelijk bericht -----
> > Van: "fot" <fot at autox.team.net>
> > Aan: "fot" <fot at autox.team.net>
> > Verzonden: Woensdag 5 september 2018 03:25:39
> > Onderwerp: [Fot] Crown and pinion gear break in
> >
> > I would love to here the FOT experience in breaking in new differential
> gears. What has worked well for you in the past?
> >
> > Last weekend, I was running the TR3 at Hallett with a brand new 4.55
> gear set and it failed. I probably got 30 laps total in 4 sessions on
> track. I did not think to follow any set break in procedure with the gears
> and I am wondering if that is why they failed.
> >
> > I am interested in the lists experience with brand new or new old stock
> ring and pinion break in.
> >
> > Here is a pic of the failed set.
> >
> >
> >
> > [image/jpeg:image1.jpeg]
> >
> >
> >
> > Sent from my iPhone
> > _______________________________________________
> > fot at autox.team.net
> >
> > http://www.fot-racing.com
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/pipermail/fot
> > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/van.mulders.marcel at telenet.be
> > _______________________________________________
> > fot at autox.team.net
> >
> > http://www.fot-racing.com
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/pipermail/fot
> > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/bill at ponostyle.com
> >
> >
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage <http://www.team.net/pipermail/fotUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/fot/johnstydo at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20180906/63ad77ed/attachment.html>
|