Do the oil feed holes in the cam bearings line up with the oil passages
in the block?
Regards, Tony Drews
On 9/5/2018 7:56 PM, don--- via Fot wrote:
> All,
> I have a 1296cc Spitfire motor with maybe 25 hours on it.
> 2 race weekends for sure and some tuning hours.
> Anyway, for other reasons I had to tear it down and I noticed
> the fresh cam bearings had grooves worn on the six o?clock area.
>
> Seems a bit of premature wear to me.
> What might cause this?
> Spring Pressures too high?
>
> Thanks in advance,
> Don
>
>
>
> DON COUCH PHOTOGRAPHY
> www.dcphotos.com <http://www.dcphotos.com>
> (512)-680-3540
>
>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at
> tonydrews.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20180907/1bf2246e/attachment.html>
|