--===============7516543617879296172==
boundary="----=_Part_3474923_429506121.1603732661496"
------=_Part_3474923_429506121.1603732661496
Content-Transfer-Encoding: quoted-printable
I just checked with Cometic and they do not make a MLS head gasket for the=
TR3/4 engine.=C2=A0 Only copper or composite.=C2=A0 They cannot do a valve=
relief in the composite gasket - only round bores.=C2=A0 They can do a cus=
tom valve relief in copper, but those are already available from other sour=
ces.=C2=A0 They can do custom bigger bores for the composite gasket, such a=
s a 91mm that another lister had posted a part number for back in July or A=
ugust.=C2=A0
They want $3-4000 to develop a MLS gasket so unless there was a huge intere=
st, it is not feasible for me to do and go into the head gasket selling bus=
iness.=C2=A0 Joe B
On Sunday, October 25, 2020, 04:48:15 PM EDT, Joe via Fot <fot@autox.te=
am.net> wrote: =20
=20
I=E2=80=99ll have to contact Cometic again. =C2=A0It was probably 10 years=
ago that I called them. =C2=A0They wanted me to give them a block and head=
and then order 100 gaskets. =C2=A0Was not feasible. =C2=A0Joe B
Sent from my iPhone
On Oct 25, 2020, at 9:01 AM, Mike Harmuth <ofracer@gmail.com> wrote:
=EF=BB=BFCometic will do a custom gasket for a minimal=C2=A0one time charge=
. I've had a Spitfire gasket made thick to make up for an over zealous=C2=
=A0block milling and another one with a wider piston opening. Once they mak=
e the design changes, they send you a PDF with the dimensions listed for yo=
ur approval. When it's OK, they assign=C2=A0a part number and CNC it out. D=
esign turn around is about a week and another week to make it. After the fi=
rst one is made, just call up and order replacements with your customer num=
ber, no extra charges.
mike h
=20
------=_Part_3474923_429506121.1603732661496
Content-Transfer-Encoding: quoted-printable
<html><head></head><body><div class=3D"ydp886a3fbdyahoo-style-wrap" style=
=3D"font-family: Helvetica Neue, Helvetica, Arial, sans-serif; font-size: 1=
3px;"><div></div>
<div dir=3D"ltr" data-setdir=3D"false">I just checked with Cometic =
and they do not make a MLS head gasket for the TR3/4 engine. Only cop=
per or composite. They cannot do a valve relief in the composite gask=
et - only round bores. They can do a custom valve relief in copper, b=
ut those are already available from other sources. They can do custom=
bigger bores for the composite gasket, such as a 91mm that another lister =
had posted a part number for back in July or August. </div><div dir=3D=
"ltr" data-setdir=3D"false"><br></div><div dir=3D"ltr" data-setdir=3D"false=
">They want $3-4000 to develop a MLS gasket so unless there was a huge inte=
rest, it is not feasible for me to do and go into the head gasket selling b=
usiness. Joe B</div><div><br></div>
=20
</div><div id=3D"ydpb920edbbyahoo_quoted_4655983927" class=3D"ydpb9=
20edbbyahoo_quoted">
<div style=3D"font-family:'Helvetica Neue', Helvetica, Arial, s=
ans-serif;font-size:13px;color:#26282a;">
=20
<div>
On Sunday, October 25, 2020, 04:48:15 PM EDT, Joe via F=
ot <fot@autox.team.net> wrote:
</div>
<div><br></div>
<div><br></div>
<div><div id=3D"ydpb920edbbyiv0527808704">I=E2=80=99ll have=
to contact Cometic again. It was probably 10 years ago that I called=
them. They wanted me to give them a block and head and then order 10=
0 gaskets. Was not feasible. Joe B<br clear=3D"none"><br clear=
=3D"none"><div dir=3D"ltr">Sent from my iPhone</div><div dir=3D"ltr"><br cl=
ear=3D"none"><blockquote type=3D"cite">On Oct 25, 2020, at 9:01 AM, Mike Ha=
rmuth <ofracer@gmail.com> wrote:<br clear=3D"none"><br clear=3D"none"=
></blockquote></div><blockquote type=3D"cite"><div dir=3D"ltr">=EF=BB=BF<di=
v dir=3D"ltr">Cometic will do a custom gasket for a minimal one time c=
harge. I've had a Spitfire gasket made thick to make up for an over zealous=
block milling and another one with a wider piston opening. Once they =
make the design changes, they send you a PDF with the dimensions listed for=
your approval. When it's OK, they assign a part number and CNC it out=
. Design turn around is about a week and another week to make it. After the=
first one is made, just call up and order replacements with your customer =
number, no extra charges.<div><br clear=3D"none"></div><div>mike h</div></d=
iv><br clear=3D"none"><div class=3D"ydpb920edbbyiv0527808704gmail_quote"><d=
iv class=3D"ydpb920edbbyiv0527808704gmail_attr" dir=3D"ltr"><br><br></div><=
/div></div></blockquote></div><div class=3D"ydpb920edbbyqt1227805092" id=3D=
"ydpb920edbbyqtfd56191"><br clear=3D"none"><br clear=3D"none"></div></div>
</div>
</div></body></html>
------=_Part_3474923_429506121.1603732661496--
--===============7516543617879296172==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
--===============7516543617879296172==--
|