Thanks Jerry----someone mentioned shipping costs-----probably very high.
If anyone need one, though, we can talk. I hate seeing the thing just
sitting here. Who knows when of if I'll need it.
Tom
> [Original Message]
> From: Jerry Costanzo <jerrycostanza01@sprintpcs.com>
> To: tom felts <tomfelts@earthlink.net>
> Date: 4/8/04 11:14:36 PM
> Subject: Re: Crankshaft Specs
>
> Tom,
>
> I bought one from Bill Bolton for $275. I later bought a whole engine for
> $300. I think the crank is worth $275-350. But that is just my opinion.
>
> Jerry
> ----- Original Message -----
> From: "tom felts" <tomfelts@earthlink.net>
> To: "Michael Salter" <msalter@precisionsportscar.com>; "Mike MacLean"
> <macleans@earthlink.net>; "List Healeys" <healeys@autox.team.net>
> Sent: Thursday, April 08, 2004 6:44 PM
> Subject: RE: Crankshaft Specs
>
>
> > Speaking of crankshafts, what is the $$ value of a good used one for a
> > 3000? I have one just sitting around and don't know what to do with it.
> >
> > Tom
> >
> >
> > > [Original Message]
> > > From: Michael Salter <msalter@precisionsportscar.com>
> > > To: Mike MacLean <macleans@earthlink.net>; List Healeys
> > <healeys@autox.team.net>
> > > Date: 4/8/04 7:14:53 PM
> > > Subject: RE: Crankshaft Specs
> > >
> > > Hi Michael,
> > >
> > > Main bearings 2.479 - 2.4795
> > > Main Housings 2.625 - 2.6255
> > >
> > > Rods 2.000 - 2.0005
> > > Rod Bore 2.114 - 2.1145
> > >
> > >
> > > Michael Salter
> > > www.precisionsportscar.com
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: owner-healeys@autox.team.net
[mailto:owner-healeys@autox.team.net]
> > > On Behalf Of Mike MacLean
> > > Sent: Thursday, April 08, 2004 5:32 PM
> > > To: List Healeys
> > > Subject: Crankshaft Specs
> > >
> > > I ordered some parts from David Nock this morning and while we were on
> > > the phone he gave the standard diameter specs for the Healey 100
> > > crankshaft journals. Well, I was at work driving a train at the time
> > > and wrote them down on my track warrants (the only paper handy at the
> > > time) and proceded to leave them at work. Does anyone have the
diameter
> > >
> > > specs for the standard 100 crankshaft. My crankshaft is at the
machine
> > > shop right now and the machinist is waiting for this information.
> > > Thanks,
> > > Mike MacLean
> > > 56 BN2 (a long way to go)
|